Aiming Point Method Procedures Quiz
48 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the first step in adjusting the Elevation adjusting knob?

  • Loosen the three fixing screws. (correct)
  • Insert the screwdriver into the center screw.
  • Check the sight for proper setting.
  • Rotate the screw until it aligns with the wire cross.

    • During the Aiming Pt Method, what should align with the aiming point?

  • The red dot in the sight. (correct)
  • The barrel of the launcher.
  • The trajectory of the round.
  • The bore sighting mechanism.

    • Which sight replaced the PGO-7 optical sight for the RPG?

  • PGO-7M sight
  • Aiming reflex sight
  • RS1A sight (correct)
  • Reflex combat sight

    • What was identified as a primary issue with the RS1A sight?

    <p>Inconsistent firing results.</p> Signup and view all the answers

    What is the required eye relief from the bell mouth when zeroing the Red Dot Sight?

    <p>15 cms</p> Signup and view all the answers

    What characterizes the Red Dot Sight mentioned in the content?

    <p>It provides an aiming point in the form of a red dot.</p> Signup and view all the answers

    What adjustment is made if the Red Dot does not align with the lower cross during testing?

    <p>Adjust Error in Deflection</p> Signup and view all the answers

    What feature does the Red Dot Sight have that enhances usability?

    <p>Unlimited eye relief.</p> Signup and view all the answers

    How should the aiming point be set when using the Aiming Point Method?

    <p>At a required range from the launcher</p> Signup and view all the answers

    What was a key decision based on the studies conducted at SI&T regarding the sights?

    <p>To test a simpler and user-friendly sight.</p> Signup and view all the answers

    What distance should be approximately selected for the Aiming Pt Method?

    <p>300 m</p> Signup and view all the answers

    What is the correct procedure for preparing the launcher for bore sighting?

    <p>Fasten the launcher securely and stretch strings in the bore sighting gauge.</p> Signup and view all the answers

    What should be checked periodically while using the Aiming Point Method?

    <p>The correctness of the barrel on the aiming point</p> Signup and view all the answers

    What is the first step in the procedure for using the Aiming Point Method?

    <p>Select an aiming point at the required range</p> Signup and view all the answers

    Which part of the RPG-7 sights cannot be adjusted?

    <p>Open mechanical sight</p> Signup and view all the answers

    Which method of zeroing is more suited for poor visibility conditions?

    <p>Testing target method</p> Signup and view all the answers

    Which distance is the RPG-7 bore sighted and ready for fire?

    <p>300 m</p> Signup and view all the answers

    What must be done to fire at distances other than 300 m?

    <p>Re-bore sight the weapon</p> Signup and view all the answers

    At what distance should the testing target be placed for checking the mechanical sight?

    <p>20 m</p> Signup and view all the answers

    What is the initial scale reading for the sight slide in a 300 m setup?

    <p>3</p> Signup and view all the answers

    What method can be effectively used for zeroing the Red Dot Sight indoors?

    <p>Aiming Point Method</p> Signup and view all the answers

    During the preparation for bore sighting, which of the following is NOT part of the procedure?

    <p>Clean the launcher with a solvent.</p> Signup and view all the answers

    When utilizing the aiming point method, what is a crucial requirement?

    <p>An open field with minimal obstacles.</p> Signup and view all the answers

    What is the purpose of using a plumb line during the preparation for mechanical sight testing?

    <p>To confirm that the testing target is upright.</p> Signup and view all the answers

    What is the maximum effective range for the RPG-7 against personnel?

    <p>2-10 m</p> Signup and view all the answers

    What primary role is the RPG-7 designed for?

    <p>Anti-tank</p> Signup and view all the answers

    Which issue can negatively affect hit probability when using the RPG-7 sight RS1A?

    <p>Loose mounting screws</p> Signup and view all the answers

    How can left-handed users operate the RPG-7 effectively?

    <p>By using the mechanical sight</p> Signup and view all the answers

    What is a potential cause for the stud of the rocket not fitting in the launcher’s recess?

    <p>Accumulation of carbon inside the launcher</p> Signup and view all the answers

    What maintenance step is advised after every 5-6 fires of the RPG-7?

    <p>Remove accumulated carbon from the launcher</p> Signup and view all the answers

    Which feature is included in the design of the firing position for the RPG-7?

    <p>Elbow rest dimensions</p> Signup and view all the answers

    Which condition can lead to improper bore sighting of the RPG-7?

    <p>Faulty fitting of the sight slide mounting latch</p> Signup and view all the answers

    What color coding corresponds to the armament defeating type of warhead?

    <p>Black (Armour Defeating)</p> Signup and view all the answers

    What is the first step in the process of preparing the VOSEL (M2) Fire Control Unit for use?

    <p>Check the battery status</p> Signup and view all the answers

    During the auto-test cycle, which message indicates that the software version is being displayed?

    <p>'VERSION XX-YY'</p> Signup and view all the answers

    What should be done with the munition while carrying it according to the guidelines?

    <p>Pointing towards the ground</p> Signup and view all the answers

    What sequence of messages is displayed when the FCU is turned on?

    <p>'AUTO TEST MODE', 'NO MUNITION', 'MEASURE MODE'</p> Signup and view all the answers

    What must be done after releasing the Fire push-button during the auto-test routine?

    <p>Release the cover lid</p> Signup and view all the answers

    Which of the following actions is NOT part of the process for preparing the FCU for use?

    <p>Insert the battery into the left side of the FCU</p> Signup and view all the answers

    During the auto test, which result indicates a successful completion of the battery test?

    <p>'FULL BTY'</p> Signup and view all the answers

    What message is displayed if the valid time for calculations is elapsed before firing?

    <p>OUT OF TIME</p> Signup and view all the answers

    What happens when the Fire push-button is released?

    <p>The Firing Con Unit turns off.</p> Signup and view all the answers

    What causes the 'MUNITION ERROR' message to appear?

    <p>The munition is damaged or not detected.</p> Signup and view all the answers

    How should the weapon system be disassembled after firing completion?

    <p>In the reverse order of assembly.</p> Signup and view all the answers

    What does the 'SENSOR ERROR' message indicate?

    <p>The triaxial sensor is malfunctioning.</p> Signup and view all the answers

    What should be checked when encountering a 'MUNITION ERROR'?

    <p>Ensure correct munition connection and inspect for damage.</p> Signup and view all the answers

    What message indicates that the temperature of the munition propellant is unsafe for firing?

    <p>TEMP ERROR</p> Signup and view all the answers

    What does the message 'QUICK FIRING' indicate during the firing cycle?

    <p>The triaxial sensor is working improperly.</p> Signup and view all the answers

    Study Notes

    Instructional Aid Restrictions

    • This document is for use only within the Infantry School.
    • It cannot be quoted as an authority outside the school.
    • Suggestions and queries should be directed to the designated DS Coordinator through the respective PI instructors.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Related Documents

    Final HWC Book PDF

    Description

    Test your knowledge on the Aiming Point Method and related sight adjustments. This quiz covers essential steps, procedures, and technical features of various sight types. Perfect for those looking to refine their understanding of these important aiming techniques.

    More Like This

    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser