GTS Mod 7 Difficult
18 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What component controls the pump output in an engine?

  • Exhaust nozzle actuators
  • AB fuel control unit
  • Variable area nozzle
  • Pressure ratio control unit (correct)
  • How does the pressure ratio control unit restore balance in an engine?

  • By closing the exhaust nozzle actuators
  • By increasing the variable area nozzle size
  • By reducing the AB duct pressure
  • By adjusting the exhaust nozzle pump output (correct)
  • What happens to the nozzle area when the gas load on the nozzle flaps increases?

  • Nozzle area opens up (correct)
  • Nozzle area remains constant
  • Nozzle area closes
  • Nozzle area decreases
  • In the context of engine operation, what does the AB fuel control unit do?

    <p>Schedules an increase in fuel pump output</p> Signup and view all the answers

    How does an out-of-balance condition between hydraulic actuators and gas loads affect the nozzle flaps?

    <p>Opens the nozzle flaps</p> Signup and view all the answers

    What is the purpose of the pressure ratio control unit in engine operation?

    <p>To maintain the P3 / P6 ratio</p> Signup and view all the answers

    What is the purpose of corrugations in an AB duct?

    <p>To dampen the vibrations</p> Signup and view all the answers

    Which component is responsible for controlling the rapidly expanding gas during AB operation?

    <p>Variable Area Nozzle</p> Signup and view all the answers

    What type of nozzle system consists of concave flaps or eyelids that are fully closed for normal engine operation and fully open for AB operation?

    <p>Two Position Nozzle</p> Signup and view all the answers

    In the context of AB ducts, what do holes primarily allow into the duct?

    <p>Cooling air</p> Signup and view all the answers

    Which component is essential for engine power control during AB operation?

    <p>Variable Area Nozzle</p> Signup and view all the answers

    What is the main function of a screech liner in an AB system?

    <p>Absorb pressure fluctuations</p> Signup and view all the answers

    What happens if the nozzle opens when AB is not selected?

    <p>The engine will over-speed</p> Signup and view all the answers

    In the context of the text, what is the purpose of a fail-safe system in an afterburner?

    <p>To shut down the afterburner and close the nozzles in case of a fault</p> Signup and view all the answers

    What is the role of the engine pressure ratio control unit in relation to afterburner operation?

    <p>To ensure correct coordination between fuel flow and nozzle area for effective operation</p> Signup and view all the answers

    How does the afterburner fuel control unit respond when the throttle is advanced into the afterburner range?

    <p>It determines the amount of fuel delivered to the afterburner manifolds</p> Signup and view all the answers

    What component alters the pressure ratio across the engine during afterburner operation?

    <p>Pressure ratio control unit</p> Signup and view all the answers

    What term is used in the text to refer to the pressure in the exhaust duct during afterburner operation?

    <p>P6</p> Signup and view all the answers

    Use Quizgecko on...
    Browser
    Browser