Aerospace Engineering: Edge Distance vs Edge Margin
10 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What does Airbus use to denote the distance between rivet center and the element's edge?

  • Edge Margin
  • Rivet Center Distance
  • Edge Distance (correct)
  • Fastener Edge Distance
  • What is the term used by Boeing for the distance between rivet center and the element's edge?

  • Edge Margin (correct)
  • Edge Distance
  • Fastener Hole Distance
  • Rivet Center Distance
  • What does Edge Distance describe according to the context?

  • The distance between the rivet center and the fastener hole wall
  • The distance between the rivet center and the element's edge
  • The distance between the element's edge and the fastener hole center
  • The distance between the fastener hole wall and the edge of the component (correct)
  • What is the difference between Edge Distance and Edge Margin?

    <p>They are used to describe the same measurement but with different terminology</p> Signup and view all the answers

    What is the common concept described by both Edge Distance and Edge Margin?

    <p>The distance between the rivet center and the element's edge</p> Signup and view all the answers

    What is the most commonly used layout in fuselage manufacturing?

    <p>Parallel layout</p> Signup and view all the answers

    Why is the shifted layout used in the wing tank area?

    <p>Due to higher surface pressure</p> Signup and view all the answers

    What is the purpose of the shifted layout in the wing tank area?

    <p>To ensure fuel leak tightness</p> Signup and view all the answers

    What type of joint is used in fuselage manufacturing?

    <p>Lap-/butt-joint</p> Signup and view all the answers

    What is the advantage of the parallel layout?

    <p>It distributes forces linearly</p> Signup and view all the answers

    Study Notes

    Edge Distance and Edge Margin

    • Airbus uses the term "Edge Distance" to describe the distance between the rivet center and the element's edge.
    • Boeing uses the term "Edge Margin" to describe the distance between the rivet center and the element's edge.
    • Edge Distance measures the distance between the fastener hole wall and the edge of the component.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Description

    Learn about the difference between Edge Distance and Edge Margin as used by Airbus and Boeing in aerospace engineering. Understand how these measurements are calculated and applied in aircraft design.

    More Like This

    Aerospace Engineering Fuel Systems
    5 questions
    Aerospace Engineering Wing Structure Quiz
    5 questions
    Aircraft Structure and Design Quiz
    10 questions
    Use Quizgecko on...
    Browser
    Browser