Installation Instructions
5 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the minimum distance that the antenna should be placed from other devices when wall mounting?

  • 24 inches (correct)
  • 18 inches
  • 30 inches
  • 12 inches

    • Which is the correct method for securing the antenna cable to ensure proper installation?

  • Leave the cables loose for easier access.
  • Use velcro strips for flexibility.
  • Secure with electrical tape at least 6 inches below the antenna. (correct)
  • Bend the cables sharply to fit snugly.

    • For optimal performance of a window-mounted antenna, what should be ensured?

  • The window is tinted to protect from UV rays.
  • It is installed on the west side of the building only.
  • The suction cup is placed near electrical outlets.
  • There is a clear line of sight to the nearest cell tower. (correct)

    • What tool is necessary for creating a mounting hole in the wall during installation?

    <p>Drill with 5/16” or 7/32” drill bits</p> Signup and view all the answers

    What is the minimum required RSSI signal strength for optimal performance during commissioning and testing?

    <p>-75dB</p> Signup and view all the answers

    Study Notes

    Required Tools

    • Phillips screwdriver
    • 5/16" and 7/32" drill bits
    • Loctite or 3M Red 271 Thread Locker

    Mounting Options

    Wall Mount

    • Install at least 24 inches from other devices.
    • Drill a 0.25" hole.
    • Insert provided wall anchor.
    • Secure antenna with screws.

    Window Mount

    • Use suction cup to attach to window.
    • Ensure clear line of sight to nearest cell tower.

    Table Mount

    • Place upright on stable surface.
    • At least 24 inches from other devices.

    Installation Guidelines

    Antenna Placement

    • Avoid interference near electrical devices, metallic surfaces, or obstacles like tinted glass.

    Cable Routing

    • Ensure cables are not bent sharply.
    • Secure cables at least 6 inches below the antenna.
    • Use electrical tape or UV-resistant cable ties.

    Cable Connection

    • Connect antenna cables to router (CELL 1 to MAIN0, CELL 2 to AUX0/DIV).

    Commissioning & Testing

    • Check cable security and avoid sharp bends.
    • Verify signal strength (RSSI) above -75dB using a cellular device.
    • Maintain at least 20 cm distance from antenna for RF compliance.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    More Like This

    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser