Podcast
Questions and Answers
What does a solid white indicator LED signify on the device?
What does a solid white indicator LED signify on the device?
- Firmware is updating
- System is booting
- WiFi is disabled by user
- Device is passing a signal (correct)
When the indicator shows a red light that is softly blinking, what is the issue with the device?
When the indicator shows a red light that is softly blinking, what is the issue with the device?
- Device has a firmware error (correct)
- No SIM card installed
- Device is in factory reset mode
- WiFi is disabled
What is indicated by a fast blinking yellow light on the device?
What is indicated by a fast blinking yellow light on the device?
- WPS pairing mode
- Setup is complete
- Firmware is updating
- Device is performing a factory reset (correct)
If a user has disabled WiFi through settings, what color and state will the indicator LED show?
If a user has disabled WiFi through settings, what color and state will the indicator LED show?
During the firmware update process, what light pattern should one expect to see?
During the firmware update process, what light pattern should one expect to see?
Flashcards
White (Fast Blinking)
White (Fast Blinking)
Firmware update in progress (FOTA).
Red (Hard Blinking)
Red (Hard Blinking)
No SIM card detected.
Green (Solid Green)
Green (Solid Green)
WiFi is disabled by the user while signal is passing.
Yellow (Fast Blinking)
Yellow (Fast Blinking)
Signup and view all the flashcards
Blue (Hard Blinking)
Blue (Hard Blinking)
Signup and view all the flashcards
Study Notes
Signal Status Indicators
- White (Fast Blinking): Firmware update (FOTA) in progress. Shows only for the firmware installation or before a FOTA reboot for 1-2 seconds.
- White (Slow Blinking): System booting. Displays until device is ready for signal status.
- White (Solid): Signal passing. Shows after the device is ready, if the signal is being received.
- White (50% Bright): Setup complete. Brightness reduces after 5 minutes of a passing signal.
- Red (Hard Blinking): No SIM card detected.
- Red (Soft Blinking): Firmware error. Device has a critical error.
- Green (Solid Green): WiFi is disabled by the user. If the user disables WiFi, but the device still receives signal.
- Yellow (Fast Blinking): Factory reset initiated. Shows after the hard-reset button is pressed until restart.
- Blue (Hard Blinking): WPS pairing. Shows for 2 minutes after the WPS button is pressed or until the pairing completes.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.