OSI Layers Model for BENG 24 COE 2024/2025 PDF

OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 OSI Reference Model - Network Reference Models A computer network connects two or more devices together to share information and services. Multiple networks connected together form an internetwork. Inter...

OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 OSI Reference Model - Network Reference Models A computer network connects two or more devices together to share information and services. Multiple networks connected together form an internetwork. Internetworking present challenges - interoperating between products from different manufacturers requires consistent standards. Network reference models were developed to address these challenges. A network reference model serves as a blueprint, detailing how communication between network devices should occur. The two most recognized network reference models are: The Open Systems Interconnection (OSI) model The Department of Defense (DoD) model Without the framework that network models provide, all network hardware and software would have been proprietary. Organizations would have been locked into a single vendor’s equipment, and global networks like the Internet would have been impractical, if not impossible. Network models are organized into layers, with each layer representing a specific networking function. These functions are controlled by protocols, which are rules that govern end-to-end communication between devices. Protocols on one layer will interact with protocols on the layer above and below it, forming a protocol suite or stack. The TCP/IP suite is the most prevalent protocol suite, and is the foundation of the Internet. A network model is not a physical entity – there is no OSI device. Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 Manufacturers do not always strictly adhere to a reference model’s blueprint, and thus not every protocol fits perfectly within a single layer. Some protocols can function across multiple layers. OSI Reference Model The Open Systems Interconnection (OSI) model was developed by the International Organization for Standardization (ISO), and formalized in 1984. It provided the first framework governing how information should be sent across a network. The OSI model consists of seven layers, each corresponding to a specific network function: 7 Application 6 Presentation 5 Session 4 3 Transport 2 Network 1 Data-link Physical Note that the bottom layer is Layer 1. Various mnemonics make it easier to remember the order of the OSI model’s layers: 7 Application All Away 6 Presentation People Pizza 5 Session Seem Sausage 4 3 Transport To Throw 2 Network Need Not 1 Data-link Data Do Physical Processing Please Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 ISO further developed an entire protocol suite based on the OSI model; however, the OSI protocol suite was never widely implemented. The OSI model itself is now somewhat deprecated – modern protocol suites, such as the TCP/IP suite, are difficult to fit cleanly within the OSI model’s seven layers. This is especially true of the upper three layers. The bottom (or lower) four layers are more clearly defined, and terminology from those layers is still prevalently used. Many protocols and devices are described by which lower layer they operate at. OSI Model - The Upper Layers The top three layers of the OSI model are often referred to as the upper layers: Layer-7 - Application layer Layer-6 - Presentation layer Layer-5 - Session layer Protocols that operate at these layers manage application-level functions, and are generally implemented in software. The function of the upper layers of the OSI model can be difficult to visualize. Upper layer protocols do not always fit perfectly within a layer, and often function across multiple layers. OSI Model - The Application Layer The Application layer (Layer-7) provides the interface between the user application and the network. A web browser and an email client are examples of user applications. Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 The user application itself does not reside at the Application layer - the protocol does. The user interacts with the application, which in turn interacts with the application protocol. Examples of Application layer protocols include: FTP, via an FTP client HTTP, via a web browser POP3 and SMTP, via an email client Telnet The Application layer provides a variety of functions: Identifies communication partners Determines resource availability Synchronizes communication The Application layer interacts with the Presentation layer below it. As it is the top-most layer, it does not interact with any layers above it. (Reference: http://docwiki.cisco.com/wiki/Internetworking_Basics) OSI Model - The Presentation Layer The Presentation layer (Layer-6) controls the formatting and syntax of user data for the application layer. This ensures that data from the sending application can be understood by the receiving application. Standards have been developed for the formatting of data types, such as text, images, audio, and video. Examples of Presentation layer formats include: Text - RTF, ASCII, EBCDIC Images - GIF, JPG, TIF Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 Audio - MIDI, MP3, WAV Movies - MPEG, AVI, MOV If two devices do not support the same format or syntax, the Presentation layer can provide conversion or translation services to facilitate communication. Additionally, the Presentation layer can perform encryption and compression of data, as required. However, these functions can also be performed at lower layers as well. For example, the Network layer can perform encryption, using IPSec. OSI Model - The Session Layer The Session layer (Layer-5) is responsible for establishing, maintaining, and ultimately terminating sessions between devices. If a session is broken, this layer can attempt to recover the session. Sessions communication falls under one of three categories: Full-Duplex – simultaneous two-way communication Half-Duplex – two-way communication, but not simultaneous Simplex – one-way communication Many modern protocol suites, such as TCP/IP, do not implement Session layer protocols. Connection management is often controlled by lower layers, such as the Transport layer. The lack of true Session layer protocols can present challenges for high availability and failover. Reliance on lower-layer protocols for session management offers less flexibility than a strict adherence to the OSI model. Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 OSI Model - The Lower Layers The bottom four layers of the OSI model are often referred to as the lower layers: Layer-4 – Transport layer Layer-3 – Network layer Layer-2 – Data-Link layer Layer-1 – Physical layer Protocols that operate at these layers control the end-to-end transport of data between devices, and are implemented in both software and hardware. OSI Model - The Transport Layer The Transport layer (Layer-4) does not actually send data, despite its name. Instead, this layer is responsible for the reliable transfer of data, by ensuring that data arrives at its destination error-free and in order. Transport layer communication falls under two categories: Connection-oriented – requires that a connection with specific agreed-upon parameters be established before data is sent. Connectionless – requires no connection before data is sent. Connection-oriented protocols provide several important services: Segmentation and sequencing – data is segmented into smaller pieces for transport. Each segment is assigned a sequence number, so that the receiving device can reassemble the data on arrival. Connection establishment – connections are established, maintained, and ultimately terminated between devices. Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 Acknowledgments – receipt of data is confirmed through the use of acknowledgments. Otherwise, data is retransmitted, guaranteeing delivery. Flow control (or windowing) – data transfer rate is negotiated to prevent congestion. The TCP/IP protocol suite incorporates two Transport layer protocols: Transmission Control Protocol (TCP) – connection-oriented User Datagram Protocol (UDP) - connectionless (Reference: http://www.tcpipguide.com/free/t_TransportLayerLayer4-2.htm) OSI Model - The Network Layer The Network layer (Layer-3) controls internetwork communication, and has two key responsibilities: Logical addressing – provides a unique address that identifies both the host, and the network that host exists on. Routing – determines the best path to a particular destination network, and then routes data accordingly. Two of the most common Network layer protocols are: Internet Protocol (IP) Novell’s Internetwork Packet Exchange (IPX). IPX is almost entirely deprecated. IP version 4 (IPv4) and IP version 6 (IPv6) are covered in nauseating detail in other guides. OSI Model - The Data-Link Layer Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 While the Network layer is concerned with transporting data between networks, the Data-Link layer (Layer-2) is responsible for transporting data within a network. The Data-Link layer consists of two sublayers: Logical Link Control (LLC) sublayer Media Access Control (MAC) sublayer The LLC sublayer serves as the intermediary between the physical link and all higher layer protocols. It ensures that protocols like IP can function regardless of what type of physical technology is being used. Additionally, the LLC sublayer can perform flow-control and error checking, though such functions are often provided by Transport layer protocols, such as TCP. The MAC sublayer controls access to the physical medium, serving as mediator if multiple devices are competing for the same physical link. Datalink layer technologies have various methods of accomplishing this - Ethernet uses Carrier Sense Multiple Access with Collision Detection (CSMA/CD), and Token Ring utilizes a token. Ethernet is covered in great detail in another guide. OSI Model - The Data-Link Layer (continued) The Data-link layer packages the higher-layer data into frames, so that the data can be put onto the physical wire. This packaging process is referred to as framing or encapsulation. The encapsulation type will vary depending on the underlying technology. Common Data-link layer technologies include following: Ethernet – the most common LAN data-link technology Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 Token Ring – almost entirely deprecated FDDI (Fiber Distributed Data Interface) 802.11 Wireless Frame-Relay ATM (Asynchronous Transfer Mode) The data-link frame contains the source and destination hardware (or physical) address. Hardware addresses uniquely identify a host within a network, and are often hardcoded onto physical network interfaces. However, hardware addresses contain no mechanism for differentiating one network from another, and can only identify a host within a network. The most common hardware address is the Ethernet MAC address. OSI Model - The Physical Layer The Physical layer (Layer-1) controls the signaling and transferring of raw bits onto the physical medium. The Physical layer is closely related to the Data-link layer, as many technologies (such as Ethernet) contain both datalink and physical functions. The Physical layer provides specifications for a variety of hardware: Cabling Connectors and transceivers Network interface cards (NICs) Wireless radios Hubs Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 Physical-layer devices and topologies are covered extensively in other guides. Encapsulation and Layered Communication As data is passed from the user application down the virtual layers of the OSI model, each layer adds a header (and sometimes a trailer) containing protocol information specific to that layer. These headers are called Protocol Data Units (PDUs), and the process of adding these headers is called encapsulation. Note that in the TCP/IP protocol suite only the lower layers perform encapsulation, generally. For example, a Transport layer protocol such as TCP will add a header containing flow control, port numbers, and sequencing. The Network layer header contains logical addressing information, and the Data-link header contains physical addressing and other hardware specific information. The PDU of each layer is identified with a different term: Layer PDU Name Application - Presentation - Session - Transport Segments Network Packets Data-Link Frames Physical Bits Each layer communicates with the corresponding layer on the receiving device. For example, on the sending device, source and destination hardware addressing is placed in a Data-link header. On the receiving device, that Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 Data-link header is processed and stripped away (decapsulated) before being sent up to the Network and other upper layers. Network devices are commonly identified by the OSI layer they operate at; or, more specifically, what header or PDU the device processes. For example, switches are generally identified as Layer-2 devices, as switches process information stored in the Data-Link header of a frame, such as Ethernet MAC addresses. Similarly, routers are identified as Layer3 devices, as routers process logical addressing information in the Network header of a packet, such as IP addresses. Encapsulation Illustrated The following illustrates how basic encapsulation occurs with the TCP/IP stack, which typically performs encapsulation only at the lower layers: During encapsulation on the sending host: Data from the user application is handed off to the Transport layer. The Transport layer adds a header containing protocol-specific information, and then hands the segment to the Network layer. Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 The Network layer adds a header containing source and destination logical addressing, and then hands the packet to the Data-Link layer. The Data-Link layer adds a header containing source and destination physical addressing and other hardware-specific information. The Data-Link frame is then handed off to the Physical layer to be transmitted on the network medium as bits. During decapsulation on the receiving host, the reverse occurs: The frame is received from the physical medium. The Data-Link layer processes its header, strips it off, and then hands it off to the Network layer. The Network layer processes its header, strips it off, and then hands it off to the Transport layer. The Transport layer processes its header, strips it off, and then hands the data to the user application. OSI Reference Model Example A web browser serves as a good practical illustration of the OSI model and the TCP/IP protocol suite: Τhe web browser serves as the user interface for accessing a website. The browser itself does not function at the Application layer. Instead, the web browser invokes the Hyper Text Transfer Protocol (HTTP) to interface with the remote web server, which is why http:// precedes every web address. The Internet can provide data in a wide variety of formats, a function of the Presentation layer. Common formats on the Internet include HTML, Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 XML, PHP, GIF, and JPEG. Any encryption or compression mechanisms used on a website are also considered a Presentation layer function. The Session layer is responsible for establishing, maintaining, and terminating the session between devices, and determining whether the communication is half-duplex or full-duplex. However, the TCP/IP stack generally does not include session-layer protocols, and is reliant on lower-layer protocols to perform these functions. HTTP utilizes the TCP Transport layer protocol to ensure the reliable delivery of data. TCP establishes and maintains a connection from the client to the web server, and packages the higher-layer data into segments. A sequence number is assigned to each segment so that data can be reassembled upon arrival. The best path to route the data between the client and the web server is determined by IP, a Network layer protocol. IP is also responsible for the assigned logical addresses on the client and server, and for encapsulating segments into packets. Data cannot be sent directly to a logical address. As packets travel from network to network, IP addresses are translated to hardware addresses, which are a function of the Data-Link layer. The packets are encapsulated into frames to be placed onto the physical medium. The data is finally transferred onto the network medium at the Physical layer, in the form of raw bits. Signaling and encoding mechanisms are defined at this layer, as is the hardware that forms the physical connection between the client and the web server. IP and the DoD Model Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 The Internet Protocol (IP) was originally developed by the Department of Defense (DoD), and was a cornerstone for a group of protocols that became known as the TCP/IP protocol suite. The DoD developed their own networking model, which became known as the DoD or TCP/IP Model. It consists of four layers: OSI Model DoD Model 7 Application 6 Presentation Application 5 Session 4 4 3 Transport Host-to-Host 2 Network 3 Internet 1 2 Data-link Network Access The consolidated Physical 1 DoD model is generally regarded as more practical than the OSI model. Upper layer protocols often provide services that span the top three layers. A converged Data-link and Physical layer is also sensible, as many technologies provide specifications for both layers, such as Ethernet. The following chart illustrates where common protocols fit into the DoD model: Layer Example Protocols Application FTP, HTTP, SMTP Host-to-Host TCP, UDP Internet IP Network Access Ethernet Prepared by Eng. Nizetha Kimario  OSI LAYERS MODEL FOR BENG 24 COE 2024/2025 Despite the practicality of the DoD model, the OSI model is still the basis for most network terminology. So, Please Do Not Throw Sausage Pizza Away. ☺ Prepared by Eng. Nizetha Kimario